Outdoor GreatRoom 60-Inch Ready-to-Finish Linear Outdoor Gas Fireplace

The Outdoor GreatRoom Company RLFP-60DNG is a 60-inch ready-to-finish linear outdoor gas fireplace built for permanent installation — and built to last once it gets there. The structural frame is G90 marine-grade galvanized steel, the enclosure is Hardiebacker fiber cement board, and the fireplace opening is lined in 304 stainless steel. That's not a material list padded for reassurance; those are genuinely the right choices for an outdoor appliance that will see moisture, heat cycles, and weather year after year.

The BI757 Crystal Fire Plus burner insert comes pre-installed and delivers 100,000 BTUs via Direct Spark Electronic Ignition — no pilot light to baby, no manual lighting ritual on a cold evening. The 60-inch wide by 20-inch tall viewing area produces a long, low flame profile that reads as deliberately architectural rather than incidental. At 92 inches wide overall and 48 inches tall, this unit is sized for a substantial outdoor surround, and it ships in a single piece (for units 8 feet or less) so there's no on-site assembly puzzle to solve before the installer arrives.

Two 10-square-inch vents come pre-installed on opposing sides, and clearances to combustible framing are clearly defined: 6 inches at the top, 1 inch on the sides, and 1 inch at the back — giving your contractor the exact numbers needed for framing without a back-and-forth with the manufacturer. Natural gas operating pressure runs between 6 and 10.5 inches W.C., with an ideal target of 7 inches W.C.

A few practical notes worth knowing before you order: fire media (40 lbs recommended), external controls, and an emergency stop must be ordered separately — this is the fireplace itself, not a turnkey kit. An optional 60-minute timer (PT# CF-DSI-60MT) or 4-hour timer (PT# 4HRTC) can replace the included low voltage switch if you prefer automated shutoff. Power can be supplied via a factory-installed outlet on a GFCI circuit or a 2D cell battery pack (PT# CF-DSI-BP) if hardwired power isn't convenient at your install location. Optional standoff kits are also available (RLFP-60-SO / RSTL-60-SO) if your surround design calls for them.

The unit is UL Listed and manufactured in the USA. At 242 lbs, it's not a weekend DIY project — but for a contractor-installed outdoor focal point with a 60-inch flame view, that weight is doing useful structural work.

• 60-inch viewing area (60"W x 20"H) with 304 stainless steel fireplace opening lining
• 100,000 BTU BI757 Crystal Fire Plus burner insert included and pre-installed
• Direct Spark Electronic Ignition — no manual lighting required
• G90 marine-grade galvanized steel frame built for permanent outdoor exposure
• Hardiebacker fiber cement board enclosure ready to accept stone, stucco, or tile finishing
• 92"W x 48"H x 18.5"D overall dimensions; ships in one piece
• Pre-installed vents: 2x 10 sq in on opposing sides — no field cutting required
• Combustible framing clearances: 6" top, 1" sides, 1" back
• Compatible with optional 60-minute or 4-hour timer (sold separately)
• Can be powered by GFCI outlet or 2D cell battery pack (sold separately)
• Optional standoff kits available (RLFP-60-SO / RSTL-60-SO)
• Fire media, external controls, and emergency stop must be ordered separately
• UL Listed and Made in the USA