Montigo Divine H38 Left Corner Multi-Sided Gas Fireplace

The Montigo Divine H38CLNI-2 is built around a left-corner configuration that opens two walls to a single flame — a genuine architectural statement, not a cosmetic one. With a glass opening measuring 32⅛" wide by 24¾" tall set within a 43¾" × 44" × 25¼" framed footprint, this fireplace commands presence in a room without requiring a full gut renovation to install.

At 34,000 BTU on natural gas with a direct-vent 5"/8" coaxial system, the H38CLNI-2 draws combustion air from outside and expels exhaust through the same sealed pathway — keeping your indoor air quality intact and eliminating the need for a traditional masonry chimney. The fireplace is rated at 59% efficiency, and the intermittent pilot ignition (IPI) means the pilot only runs when you actually want heat, rather than burning quietly and continuously in the background all winter.

Inside the firebox, a heritage brick liner provides the warm, time-worn backdrop that makes a traditional logset look genuinely at home. The ceramic logset sits on a wrought iron grate, and the micro mesh screen adds a refined layer of visual depth while keeping everything contained and tidy. It's the kind of interior detail that rewards a closer look.

Control is handled by a multi-function remote with Hi-Lo flame adjustment, so you can dial the ambiance from "lively dinner party" down to "quiet evening" without leaving the couch. A battery backup ensures the system remains operational even during a power outage — a thoughtful detail for a fireplace you'll actually depend on.

The H38CLNI-2 is part of the Peninsula, Panorama & Corner Indoor Direct Vent Gas Fireplace family and is compatible with other models in the H38CL/CR series, including right-corner configurations. Montigo prepackaged vent kits are the approved venting solution; use of non-Montigo approved parts will void the warranty, so spec accordingly from the start.

This model is designed for residential installation only and is not rated for commercial use. If your project calls for a right-corner layout, the companion H38CR series offers the same fireplace mirrored for the opposite wall configuration.

• Two-sided left-corner viewing — flame visible across two walls simultaneously
• 34,000 BTU natural gas output via direct-vent 5"/8" coaxial system
• Heritage brick liner with wrought iron grate and ceramic logset
• Intermittent pilot ignition (IPI) — pilot only active when in use
• Multi-function remote with Hi-Lo flame control included
• Battery backup for continued operation during power outages
• Micro mesh screen for a refined, finished firebox appearance
• Framing dimensions: 43¾" W × 44" H × 25¼" D
• Glass opening: 32⅛" W × 24¾" H
• 59% efficiency rating
• Compatible with H38CL/CR series and Montigo prepackaged vent kits
• Residential use only; non-Montigo parts void warranty