Firegear 30" x 10" Linear Flat H Burner Match Throw Paver Block Package

This package is built around a 30-inch brass H-burner with 20 injectors and a match throw ignition — straightforward, reliable, and sized to anchor a serious paver block fire feature. Natural gas models are rated at 80,000 BTU (23.44 kW); liquid propane models step up to 110,000 BTU (32.23 kW). The factory sets your fuel type at the time of manufacture, and Firegear does not offer conversion kits for Pro Series brass burners, so choose your fuel source carefully before ordering.

The burner itself measures 30 inches long by 6.75 inches wide, seated in a pan that spans 30 to 35 inches in length and 10 to 15 inches in width — giving contractors and serious DIYers meaningful flexibility when sizing their enclosure. The stainless steel FlexFrame (FLEXFRAME-SS) suspends the burner within that range and adapts to round, square, or rectangular paver block builds without requiring custom fabrication.

What makes this a true package rather than just a burner listing is everything else in the box. The Paver Control Panel (PAVER-CP-MT) arrives with its faceplate and mounting bracket ready for a clean, finished installation. The Paver Vent Kit (PAVER-VENT-4) includes two vents sized at 3 5/8" H x 8" W, with extension plates that reach up to 10" W, plus lintels and concrete anchors — the details that tend to get forgotten until you're mid-project. A Key Valve Kit is also included. Rounding things out are three 10-lb bags of black lava rock (LAVA-10 x3), so the fire pit looks intentional from day one rather than waiting on a separate media order.

Installation is designed for both contractor and DIY use within standard paver block construction. The 30" x 10" footprint fits conventional patio layouts, and the FlexFrame system removes much of the guesswork around enclosure geometry. Match throw ignition keeps the mechanical footprint simple — no electronic ignition components to troubleshoot, no additional wiring runs required.

One important note before purchasing: fuel type is set at the factory and cannot be converted in the field. Select natural gas or liquid propane based on your actual supply at the installation site. Once that decision is made correctly, this package is engineered to go from pallet to first flame with no missing pieces.

• 30" brass H-burner with 20 injectors and match throw ignition
• 80,000 BTU (NG) or 110,000 BTU (LP) — factory-set fuel type, no field conversion available
• FlexFrame (FLEXFRAME-SS) burner suspension accommodates round, square, and rectangular paver block enclosures
• Pan range: 30"–35" L x 10"–15" W for flexible enclosure sizing
• Paver Control Panel (PAVER-CP-MT) with faceplate and mounting bracket included
• Paver Vent Kit (PAVER-VENT-4): two vents (3 5/8" H x 8" W) with extension plates up to 10" W, lintels, and concrete anchors
• Key Valve Kit included
• 30 lbs of black lava rock media included (3 x 10-lb bags)
• Designed for DIY and contractor installation in standard paver block construction
• All-in-one package — no separate accessory orders required