Empire Flint Hill 18" Ceramic Fiber Gas Log Set, 5-Piece

The Empire Flint Hill gas log set ships as a 5-piece ceramic fiber arrangement sized at 18 inches — a format that fits snugly into masonry fireplaces and UL 127 factory-built units with a minimum opening of 22.5 inches wide and 12 inches deep. If your firebox has been sitting decoratively idle, this is a straightforward path to actual heat.

At the heart of the set is a Contour burner paired with a manual pilot valve that gives you three distinct output settings: High (28,000 BTU), Medium (23,000 BTU), and Low (19,000 BTU). No remote, no app, no firmware updates — just a knob. For many homeowners, that simplicity is the whole point. The VFDM18LBN is a manual-control model and is not compatible with remote controls or thermostats, so what you see is what you get: reliable, hands-on operation.

Certified for vent-free installation, the Flint Hill can run without a chimney or flue connection, making it a viable option for rooms where traditional venting isn't practical. It can also be installed as a vented decorative appliance in a working fireplace if you prefer to keep the damper open. Either way, the regulator is factory-set to 6.0 inches W.C., with an acceptable inlet pressure range of 7.0 to 10.5 inches W.C. — specs worth confirming with your installer before purchase.

The ceramic fiber logs in the Flint Hill style are crafted to replicate the look of seasoned hardwood, with the kind of surface detail that holds up under firelight. At 20 pounds for the complete set, installation is manageable without a crew. The air shutter opening is set at 1/8 inch — a fine detail, but one that matters for clean combustion and flame character.

One important note before ordering: this unit is configured exclusively for natural gas. It is not field-convertible to propane. If your home runs on LP, the companion model VFDM18LBP is the correct choice. Fuel type is determined by the rating plate and cannot be changed after manufacture.

Compatible with solid-fuel-burning masonry fireplaces, UL 127 factory-built fireplaces, and listed ventless firebox enclosures. Installation in permanently located manufactured (mobile) homes is permitted where local codes allow. At $649, the Flint Hill sits in a category where craftsmanship and output legitimately justify the price — no padding required.

• 5-piece ceramic fiber log set in the Flint Hill style, sized at 18 inches
• Contour burner with three heat levels: High (28,000 BTU), Medium (23,000 BTU), Low (19,000 BTU)
• Manual pilot valve with 3-position knob — no remotes, no thermostats, no complications
• Vent-free certified; can also be installed as a vented decorative appliance
• Fits fireplaces with a minimum width of 22.5" and minimum depth of 12"
• Compatible with masonry fireplaces, UL 127 factory-built fireplaces, and listed ventless firebox enclosures
• Natural gas only — not convertible to propane (see VFDM18LBP for LP version)
• Regulator factory-set at 6.0" W.C.; inlet pressure range 7.0"–10.5" W.C.
• Air shutter opening: 1/8" for optimized combustion
• Complete set weight: 20 lbs