Firegear 39" Round 304 Stainless Flat Pan Burner System with 36" Spur

The Firegear FPB-39DBS36MT-N is a serious piece of hardware: a 39-inch round flat pan burner system producing 250,000 BTU, built from 304 stainless steel throughout — both the pan and the 36-inch burning spur. This is the workhorse at the center of a custom fire pit build, not a decorative afterthought.

At 39 inches across, the flat pan provides a broad, stable platform for fire media, while the 36-inch stainless steel spur burner beneath delivers a wide, even flame pattern that fills the pan with authority. Match-throw ignition keeps the system straightforward and the component count low — strike, throw, done. If you'd prefer a more refined lighting experience down the road, the optional MSI-BSMTI manual spark ignition kit converts this unit without replacing the core assembly.

Out of the box, the system is configured for natural gas, with a normal inlet pressure of 7.0" WC and an operating range of 5.0" to 10.5" WC. Need liquid propane instead? The OAS-LPK12 propane conversion kit handles that transition. LP operating parameters differ — normal inlet pressure runs at 11.0" WC with a range of 10.5" to 13.0" WC — so confirm your supply line specs before conversion.

The burner orifice is sized at 25/64 with a #12 designation, and the complete unit weighs 36 pounds — substantial enough to feel engineered, manageable enough to install without a crew. Note that this system is not UL Listed, and AWS (all-weather system) compatibility requires additional components not included here.

This burner system slots directly into Firegear's broader ecosystem. It's included in the paver-ready package FPB-39DBS36MTN-PK for those who want a more complete kit, and it's available here as a standalone component for builders who already know exactly what they're working with. Either way, the 39-inch flat pan and 36-inch spur combination is doing the same job: anchoring a fire feature that commands attention.

• 250,000 BTU output from a 36" stainless steel burning spur
• 39" round flat pan and spur both constructed from 304 stainless steel
• Match-throw ignition standard; upgradeable to spark ignition with optional MSI-BSMTI kit
• Natural gas configuration out of the box; LP conversion available with OAS-LPK12 kit
• Normal NG inlet pressure: 7.0" WC (range: 5.0"–10.5" WC)
• Normal LP inlet pressure: 11.0" WC (range: 10.5"–13.0" WC) after conversion
• Burner orifice: 25/64, #12 designation
• Unit weight: 36 lbs
• Standalone component — also included in paver-ready package FPB-39DBS36MTN-PK
• AWS compatibility requires additional components not included
• Not UL Listed